Good product.
Hard problem.
Telodyn solves the hard engineering and manufacturing problems that keep good products from moving forward.
That can mean fixing an existing product—or developing a new one from the ground up.
New product, cost, sourcing, tooling, or scale-up—we find the constraint and build what is needed to move forward.
See the ResultsStart here
What are you working on?
You do not need to diagnose the problem first. That is part of the work.
Where We Enter
Something is stuck—or something worth building doesn't exist yet.
You do not need to diagnose the problem before contacting us. That is part of the work.
IMPROVE WHAT EXISTS
A good product is being held back.
Cost, sourcing, tooling, quality, lead time, recurring engineering, or scale is limiting what the product or business can do.
BUILD WHAT COMES NEXT
The opportunity is clearer than the product.
A new product, product-line extension, or missing capability needs to move from idea through engineering, manufacturing, suppliers, and production.
When something is stuck, it usually shows up like this.
What it looks like
Margin disappears as volume grows.
What we look for
Part architecture, process choice, assembly sequence, tooling, vendor routing, and unnecessary custom work that may be driving cost.
What We Actually Do
Build the whole solution, not just the drawing.
Product engineering, manufacturing systems, tooling, supplier development, and low-volume production for products that are difficult to make repeatably.
01
Make the product real—and practical to build
From ground-up product architecture and mechanical design to prototypes, DFM, materials, tolerances, and production-ready definition.
- → New product architecture & mechanical engineering
- → Prototypes, DFM & validation
- → Cost reduction & simplification
02
Build the manufacturing system
Develop the tooling, fixtures, processes, supplier network, and production methods needed to make the product reliably.
- → Tooling, fixtures & process development
- → Supplier development & qualification
- → Dedicated low-volume production cells
03
Turn repeated work into capability
When products or engineering patterns repeat, we build reusable product and process architectures so the next variant does not start from zero — and, where it is genuinely differentiated, the solution can become a platform or IP asset.
- → Parametric systems
- → Modular product architectures
- → Lightweight configuration control
Beyond the Product
Sometimes the opportunity is bigger than the product.
A product can reveal something larger: a better production model, reusable architecture, or capability worth keeping.
PRODUCTION
Build the means to make it
When normal suppliers or processes do not fit, build the production capability around the product.
PLATFORM
Stop solving the same problem twice
Turn recurring engineering into a reusable architecture for future products and variants.
VALUE
Turn the solution into an asset
Create value beyond the first project through lower recurring effort, better operations, or a differentiated platform.
Proof
The point is what changes afterward.
Better economics. Shorter cycles. Repeatable production. Less recurring engineering.
The product stayed the same. The production system changed completely.
A model-only in-house manufacturing process worked, but it was costly and difficult to transfer to outside suppliers.
Telodyn built the drawing/tolerance package, 5-axis process, inspection path, and managed supply chain behind repeat production.
Unit cost
~$1,000
from $2,000+ · ≈50%+
Read case study →
The tooling was custom. The engineering didn’t have to be.
Custom turbine balancing tooling could consume weeks of expert engineering even though the underlying balancing method repeated.
Telodyn encoded the balancing logic, fixture-family selection, puck scheme, and manufacturing outputs into a reusable engineering system.
Engineering lead time
Minutes
from weeks · reusable
Read case study →
The supplier retired. The product couldn’t.
An industry-standard hand-fit product depended on expensive craft labor and a critical supplier. Replacing the supplier alone would have recreated the same dependency.
Telodyn engineered the critical interfaces, developed a new recoil-pad architecture, rebuilt the supply chain, and developed the production method behind repeatable low-volume manufacturing.
Recurring volume
500–1,000 / yr
lead time 10×+
Read case study →
Who You’re Working With
The product is only one part of the system.
Telodyn is led by Jody Wilson, with more than 30 years across advanced manufacturing, energy, sensing, industrial products, and startups.
That work has included organizations ranging from Siemens Energy, Dresser-Rand, TurboCare, and Ocean Optics to smaller specialized companies including XHP, Pela Motorsports, and Spikes Tactical, along with NSF-funded development involving GM, Cummins, CARB, and others.
The common thread is turning difficult technical problems into practical products, tooling, manufacturing systems, and durable capability.
How We Work
Start with what actually matters.
01
Understand the real constraint or opportunity.
Look across the product, engineering, manufacturing, suppliers, customer need, and economics until the work is clear enough to act on.
02
Build the practical solution.
Design the product, change, tooling, process, supplier path, or production system needed to make the opportunity work in the real world.
03
Leave behind capability.
Where useful, turn the solution into a repeatable product, process, or platform so the value continues beyond the initial project.
Where We Fit
Telodyn is for the harder problems—and the opportunities worth building.
Best fit: a real product or opportunity with a difficult engineering or manufacturing gap between today and what comes next.
Good fit
- ✓A credible new product or product-line opportunity needs to move from idea through realization.
- ✓A good product is being held back by cost, lead time, quality, sourcing, or production.
- ✓The work crosses engineering and manufacturing boundaries.
- ✓The product is too specialized for mass production but too expensive to remain pure custom work.
- ✓You want a product or capability built—not merely hours outsourced.
Explore the Work
Find the situation that looks like yours.
01
Manufacturing Cost Reduction
The product works. The economics don't.
02
Prototype to Production
The prototype works. Production doesn't.
03
Low-Volume Manufacturing
Too specialized to scale. Too expensive to stay custom.
04
Supplier & Production Risk
One supplier should not control the product.
05
Reusable Engineering Platforms
Stop engineering the same problem twice.
06
New Product Development
From idea to a product that can actually be built.